D3G DETAILED SPECIFICATIONS
|
Engine |
|
|
Engine Model |
CatŪ 3046T |
|
Flywheel Power |
70 hp / 52 kW |
|
Power - Gross |
77 hp / 57 kW |
|
Displacement |
305 in3 / 5 L |
|
Caterpillar |
70 hp / 52 kW |
|
ISO 9249 |
70 hp / 52 kW |
|
EEC 80/1269 |
70 hp / 52 kW |
|
SAE J1349 |
70 hp / 52 kW |
|
Bore |
3.7 in / 94 mm |
|
Stroke |
4.7 in / 120 mm |
|
|
Weights |
|
|
Operating Weight - XL |
16227 lb / 7351 kg |
|
Operating Weight - LGP |
17160 lb / 7784 kg |
|
|
Transmission |
|
|
Drive Pumps |
2 |
|
Track motors |
2 |
|
Relief valve settings |
6380 psi / 44000 kPa |
|
Maximum travel speed - forward |
5.6 mph / 9 km/h |
|
Maximum travel speed - reverse |
6 mph / 9.6 km/h |
|
|
Service Refill Capacities |
|
|
Fuel tank |
43.6 gal / 165 L |
|
Crankcase and filter |
3.4 gal / 13 L |
|
Final drives, XL (each side) |
3.6 gal / 13.8 L |
|
Final drives, LGP (each side) |
5.4 gal / 20.5 L |
|
Cooling system |
5.5 gal / 21 L |
|
Transmission/hydraulic tank |
12 gal / 46.5 L |
|
|
Hydraulic Controls |
|
|
Pump Output |
16.1 gal/min / 61.1 L/min |
|
Relief valve setting |
2900 psi / 20000 kPa |
|
|
Standards |
|
|
ROPS |
SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 |
|
FOPS |
SAE J231-JAN81, ISO 3449-92 |
|
|
Final Drive |
|
|
Features |
|
|
|
Steering and Braking |
|
|
Features |
|
|
|
Winch |
|
|
Weight |
1345 lb / 610 kg |
|
Winch Drive |
Hydrostatic |
|
Control |
Pilot hydraulic |
|
Speed |
Variable |
|
Winch length |
27.76 in / 705 mm |
|
Overall width |
29.2 in / 741 mm |
|
Drum diameter |
10 in / 254 mm |
|
Drum width |
10.8 in / 274 mm |
|
Throat clearance |
6.75 in / 171.5 mm |
|
Rope diameter - recommended |
.63 in / 16 mm |
|
Rope diameter - optional |
.75 in / 19 mm |
|
Drum capacity - recommended cable |
371 ft / 113 m |
|
Drum capacity - optional cable |
257 ft / 78 m |
|
Maximum line pull - bare drum |
40000 lb / 18144 kg |
|
Maximum line pull - full drum |
25000 lb / 11340 kg |
|
Maximum line speed - bare drum |
132 ft/min / 40 m/min |
|
Maximum line speed - full drum |
207 ft/min / 63 m/min |
|
|
Ripper |
|
|
Type |
Parallelogram |
|
Number of Shanks |
3 |
|
Maximum digging depth |
13.3 in / 337.5 mm |
|
Maximum reach at ground line |
29.1 in / 738.5 mm |
|
Maximum ground clearance under tip |
16.2 in / 412.2 mm |
|
Overall width |
67.3 in / 1710 mm |
|
Height |
6.5 in / 165 mm |
|
Weight |
1241 lb / 563 kg |
|
|
Undercarriage |
|
|
Number of rollers (each side) |
6 |
|
Number of shoes (each side) |
39 |
|
Shoe width - XL |
16 in / 406 mm |
|
Shoe width - LGP |
25 in / 635 mm |
|
Length of track on ground - XL |
81 in / 2055 mm |
|
Length of track on ground - LGP |
81 in / 2055 mm |
|
Track gauge - XL |
57 in / 1448 mm |
|
Track gauge - LGP |
66 in / 1676 mm |
|
Ground contact area - XL |
2586 in2 / 1.668 m2 |
|
Ground contact area - LGP |
4045 in2 / 2.61 m2 |
|
Ground pressure - XL |
6.27 psi / 43.2 kPa |
|
Ground pressure - LGP |
4.24 psi / 29.3 kPa |
|
|
Blade |
|
|
Blade width - XL |
96.9 in / 2461 mm |
|
Blade width - Intermediate |
115 in / 2921 mm |
|
Blade width - LGP |
123.9 in / 3146 mm |
|
Blade height - XL |
36.8 in / 936 mm |
|
Blade height - Intermediate |
33.2 in / 843 mm |
|
Blade height - LGP |
33.2 in / 843 mm |
|
Blade capacity - XL |
1.88 yd3 / 1.44 m3 |
|
Blade capacity - Intermediate |
1.86 yd3 / 1.42 m3 |
|
Blade capacity - LGP |
2 yd3 / 1.53 m3 |
|
Digging depth - XL |
21.8 in / 554 mm |
|
Digging depth - Intermediate |
20.7 in / 527 mm |
|
Digging depth - LGP |
20.7 in / 527 mm |
|
|
