ABC Equipment Rental & Sales

AUTHORIZED DEALER

HOME

Aerial Lifts
Back Hoes
Bulldozers
Compaction
Concrete Equipment
Excavators
Forklifts
Industrial Generators
Landscaping
Pumps
Skid Steers/Rubber Track Loaders

Chainsaws
Generators
Lawn Care
Plumbing Snakes
Power Washers
Pumps

Used Equipment
Used Equipment Catalog PDF

Blades & Bits
Hand Tools
Gloves
Lubricants
Work Wear

Virtual 360° Tour!

Rental Locations
Mapquest
Contact Us

Skid-Steer Loader Model 2054 Technical Specifications
You can print a black and white version of this chart simply by using your browser's built-in print function.

Skid-Steer Loader: Model 2054

Skid-Steer Loader Model 2054
Technical Specifications

Engine Specs
Displacement	122 CID (2.0 L)
Torque	92 ft. lb. (124.75 Nm)
Power Output	43 hp (32 kw)
Make	Yanmar
Model	4TNE84
Number of Cylinders	4
Fuel Consumption	1.44 gpm (6.5 L/m)
Electrical System Specs
Battery Power	12 V
Cold Cranking Amps	700 A
Hydraulic System Specs
Flow Rate	18 gpm (81.8 L/m)
Flow Rate — Hi-Flow	N/A gpm (0.0/0.0 L/m)
Working Pressure	2500 psi (172 bar)
Hydraulic Reservoir	11.5 gal (52 L)
Axle Torque	4900 ft. lb. (6644.40 Nm)
Capacities / Performance Specs
Travel Speed — Low	0-7 mph (0-11 km/hr)
SAE Breakout Force — Lift	3500 lbs. (1587.60 kg)
SAE Breakout Force — Tilt	4000 lbs. (1814.40 kg)
SAE Operating Load	1450 lbs. (657.72 kg)
SAE Tipping Capacity	2900 lbs. (1315.44 kg)
Travel Speed — High	N/A mph (0/0 km/hr)
Undercarriage Specs
Wheel Base	36.7 " (932.18 mm) (F)
Ground Clearance	7.7 " (195.58 mm) (I)
Dimensions / Weight Specs
Length — With Bucket	122.7 " (3116.58 mm) (H)
Width w/Heavy Duty Flotation Tires	58.8/64.0 " (1493.52/1625.60 mm) (O)
Width w/Solid Rubber Tires	56.5/57.8 " (1435.10/1468.12 mm) (O)
Height	59.5 " (1511.30 mm) (R)
Height to Hinge Pin — Fully Raised	112 " (2844.80 mm) (A)
Overall Height — Top of ROPS	76.5 " (1943.10 mm) (K)
Clearance Circle — Front (w/o Bucket)	71.5 " (1816.10 mm) (M)
Clearance Circle — Front (w/Bucket)	64.7 " (1643.38 mm) (Q)
Clearance Circle — Rear	57.4 " (1457.96 mm) (N)
Rollback Angle at Ground Level	28 ° (E)
Departure Angle	27 ° (J)
Reach at Specified Height	32 " (812.80 mm) (S)
Length — Without Bucket	95.2 " (2418.08 mm) (G)
Width w/Flotation Tires	58.8/64.0 " (1493.52/1625.60 mm) (O)
Operating Weight	5600 lbs. (2540.16 kg)
Dumping Capacity Specs
Dump Height	87.5 " (2222.50 mm) (B)
Dump Reach	23 " (584.20 mm) (C)
Dump Angle at Full Height	37 ° (D)
Bucket Specs
Width	61.5 " (1562.10 mm) (L)

CALL FOR DAILY / WEEKLY / MONTHLY RATES - PROMPT DELIVERY AVAILABLE