ABC Equipment Rental & Sales

AUTHORIZED DEALER

HOME

Aerial Lifts
Back Hoes
Bulldozers
Compaction
Concrete Equipment
Excavators
Forklifts
Industrial Generators
Landscaping
Pumps
Skid Steers/Rubber Track Loaders

Chainsaws
Generators
Lawn Care
Plumbing Snakes
Power Washers
Pumps

Used Equipment
Used Equipment Catalog PDF

Blades & Bits
Hand Tools
Gloves
Lubricants
Work Wear

Virtual 360° Tour!

Rental Locations
Mapquest
Contact Us

Skid-Steer Loader Model 2086 Technical Specifications
You can print a black and white version of this chart simply by using your browser's built-in print function.

The all new 2086 allows you to dig more dirt, haul more loads, and run just about any attachment that's available. This skid-steer is a job-site workhorse big enough to tackle the toughest jobs.

Key Features:

* 80-hp Cummins®‚ Turbocharged Tier II Diesel Engine

* 2,600 lbs. SAE Rated Operating Load; 2,900 lbs. with Optional Weight Kit

* Dump Height of 95" and Dump Reach of 28"

* Bucket Breakout Force of 6,296 lbs.

* Self-Leveling Hydraulics

* 0 - 7.7 mph Travel Speed

* 0 - 11.2 mph Travel Speed (optional)

* Cab Enclosure, Ducted Heat and A/C (optional)

* Two-Speed Drive and Hydraglide Ride Control (optional)

* 7,860 lbs. Operating Weight

Steering/Hydraulics:

* Three Choices for Steering Controls

* Auxiliary Hydraulics - 21.5 gpm Standard Flow

* Hi-Flow Hydraulics - 36 gpm (optional)

Attachment Mounting System:

* The Mutli-Tach™ Mounting System is Compatible with Most Attachments

Dimensional Drawing

Engine Specs
Make	Cummins
Model	B3.3C (Turbocharged)
Displacement	199 CID 1(3.3 L)
Number of Cylinders	4–cylinder/water cooled
Rated Power Output	80 hp 1(60 kW) @ 2200 rpm
SAE-Rated Torque	215 ft. lb. 1(291 Nm) @ 1600 rpm
Fuel Capacity	24 gal 1(91 L)
Fuel consumption 65% Duty Cycle - estimated	3.1 gph 1(11.7 L/h)
Electrical System Specs
Battery Power	12 volt
Battery Capacity	900 Ah
Cold Cranking Amps	950 amp
Hydraulic System Specs
Flow Rate	21.5 gpm 1(81 L/min)
Flow Rate — Hi-Flow	36 gpm 1(136 L/min)
Working Pressure	3000 psi 1(207 bar)
Hydraulic Reservoir	16 gal 1(60.5 L)
Axle Torque	6414 ft. lb. 1(8696 Nm)
Capacities / Performance Specs
SAE Breakout Force — Tilt	5640 lbs. 1(25 kN)
SAE Breakout Force — Lift	6296 lbs. 1(28 kN)
Travel Speed — High	0 – 11.2 mph 1(0 - 18 km/h)
SAE Rated Operating Load	2600 lbs. 1(1179 kg)
SAE Rated Operating Load w/ Optional Weight Kit	2900 lbs. 1(1315 kg)
SAE Tipping Capacity	5200 lbs. 1(2358 kg)
Travel Speed — Low	0 – 7.7 mph 1(0 - 12.4 km/h)
Undercarriage Specs
Ground Clearance	7.9 " 1(201 mm) (I)
Wheel Base	4 ' 1(1219 mm) (F)
Dimensions / Weight Specs
Severe-Duty HE Flotation Tires	5' 7.1 " 1(1709 mm)
Heavy-Duty 12.00 Flotation Tires	5' 7.3 " 1(1709 mm)
Heavy-Duty 14-17.5 Flotation Tires	5' 10.5 " 1(1791 mm)
Solid Rubber Tires	5' 4 " 1(1626 mm)
Length — Without Bucket	8' 9 " 1(2667 mm) (G)
Departure Angle	26 °
Reach at Specified Height	3' 4.5 " 1(1029 mm) (S)
Operating Weight	7860 lbs. 1(3565 kg)
Length — With Bucket	11' 2.7 " 1(3490 mm) (H)
Height	5' 9.5 " 1(1765 mm) (R)
Height to Hinge Pin — Fully Raised	10' 3 " 1(3132 mm) (A)
Overall Height — Top of ROPS	6' 9.1 " 1(2060 mm) (K)
Clearance Circle — Front (w/o Bucket)	4' 7.5 " 1(1410 mm) (M)
Clearance Circle — Front (w/Bucket)	6' 11.1 " 1(2111 mm) (Q)
Clearance Circle — Rear	5' 5.4 " 1(1661 mm) (N)
Rollback Angle at Ground Level	26 °
Dumping Capacity Specs
Dump Height	7' 11 " 1(2413 mm) (B)
Dump Reach	2' 4 " 1(711 mm) (C)
Dump Angle at Full Height	41 °
Bucket Specs
Width	6' 3 " 1(1905 mm) (L)

CALL FOR DAILY / WEEKLY / MONTHLY RATES - PROMPT DELIVERY AVAILABLE