Online Catalog

EARTHMOVING EQUIPMENT::
SVL 75 RUBBER TRACK LOADER

Where to find SVL 75 RUBBER TRACK LOADER in Cleveland

Image for reference only
Actual item may look different
Click on image for larger view

Daily: $270.00
Weekly: $780.00
Monthly: $2,300.00
Comments:
  • Track Loader Model MTL20 SVL75
  • GROSS HP 74HP
  • RATED LIFT 35% 2300LBS
  • RATED LIFT 50% 3285LBS
  • TIPPING LOAD 6570 LBS
  • OPERATING WEIGHT 9039LBS
  • Engine Specs
  • Make Isuzu
  • Model 4JG1T
  • Displacement 187 CID (3.1 L)
  • Aspiration Turbocharged
  • SAE-Rated Torque 190 ft. lb. (258 Nm) @ 1800 rpm
  • Fuel Capacity 23.8 gal (90.1 L)
  • Engine Oil Capacity 10 qt. (9.4 L)
  • Rated Power Output 81 hp (49 kW) @ 2400 rpm
  • Engine Coolant Capacity 16 qt. (15.1 L)
  • Number of Cylinders 4
  • Electrical System Specs
  • Battery Power 12 volt
  • Alternator Capacity 50 amp
  • Hydraulic System Specs
  • Auxiliary Hydraulic Flow 19.8 gpm (74.9 L/min)
  • Operating Pressure 2988 psi (206 bar)
  • Hydraulic Reservoir 10.8 gal (40.8 L)
  • Capacities / Performance Specs
  • SAE Tipping Capacity 5952 lbs. (2700 kg)
  • Travel Speed Low 0 4.5 mph (0 - 7.2 km/h)
  • Travel Speed High 0 6.4 mph (0 - 10.3 km/h)
  • Operating Load at 50% Tip Capacity 2976 lbs. (1350 kg)
  • Lift Arm Raise Cycle Time Full Load 4.3 sec.
  • Lift Arm Lower Cycle Time No Load 3.0 sec.
  • Bucket Dump Cycle Time Full Load 3.2 sec.
  • Bucket Rollback Cycle Time No Load 2.2 sec.
  • Operating Load @ 35% Tip Capacity 2083 lbs. (945 kg)
  • SAE Breakout Force Lift 7425 lbs. (33 kN)
  • SAE Breakout Force Tilt 7401 lbs. (32.9 kN)
  • Undercarriage Specs
  • Track Type Rubber
  • Track Width 1' 6 " (457 mm)
  • Track Contact Length 4' 11 " (1496 mm)
  • Track Contact Area 1060 sq. in. (6838 cm2)
  • Number of Track Rollers 5 on each side
  • Ground Clearance 1' .8 " (325 mm)
  • Ground Pressure Average 4.1 psi (0.28 kg/cm )
  • Traction Pump/Traction Drive Piston/Planetary
  • Traction Braking Hydraulic
  • Drawbar Pull 11244 lbs. (50 kN)
  • Dimensions / Weight Specs
  • Height 7' 5.1 " (2263 mm) (J)
  • Clearance Circle Front (w/Bucket) 7' 6.3 " (2294 mm) (N)
  • Clearance Circle Rear 5' 5.6 " (1666 mm) (M)
  • Departure Angle 29.2
  • Width Without Bucket 5' 9.7 " (1770 mm) (K)
  • Length Without Bucket 9' 8.1 " (2949 mm) (F)
  • Operating Weight 9590 lbs. (4350 kg)
  • Length With Bucket 12' 2 " (3708 mm) (G)
  • Lift Capacity Specs
  • Max. Lift Height to Bucket Pin 10' 3 " (3124 mm) (A)
  • Reach at Max. Lift 2' 10.4 " (874 mm)
  • Aspiration Turbocharged
  • SAE-Rated Torque 190 ft. lb. (258 Nm) @ 1800 rpm
  • Fuel Capacity 23.8 gal (90.1 L)
  • Engine Oil Capacity 10 qt. (9.4 L)
  • Rated Power Output 81 hp (49 kW) @ 2400 rpm
  • Engine Coolant Capacity 16 qt. (15.1 L)
  • Number of Cylinders 4
  • Electrical System Specs
  • Battery Power 12 volt
  • Alternator Capacity 50 amp
  • Hydraulic System Specs
  • Auxiliary Hydraulic Flow 19.8 gpm (74.9 L/min)
  • Operating Pressure 2988 psi (206 bar)
  • Hydraulic Reservoir 10.8 gal (40.8 L)
  • Capacities / Performance Specs
  • SAE Tipping Capacity 5952 lbs. (2700 kg)
  • Travel Speed Low 0 4.5 mph (0 - 7.2 km/h)
  • Travel Speed High 0 6.4 mph (0 - 10.3 km/h)
  • Operating Load at 50% Tip Capacity 2976 lbs. (1350 kg)
  • Lift Arm Raise Cycle Time Full Load 4.3 sec.
  • Lift Arm Lower Cycle Time No Load 3.0 sec.
  • Bucket Dump Cycle Time Full Load 3.2 sec.
  • Bucket Rollback Cycle Time No Load 2.2 sec.
  • Operating Load @ 35% Tip Capacity 2083 lbs. (945 kg)
  • SAE Breakout Force Lift 7425 lbs. (33 kN)
  • SAE Breakout Force Tilt 7401 lbs. (32.9 kN)
  • Undercarriage Specs
  • Track Type Rubber
  • Track Width 1' 6 " (457 mm)
  • Track Contact Length 4' 11 " (1496 mm)
  • Track Contact Area 1060 sq. in. (6838 cm2)
  • Number of Track Rollers 5 on each side
  • Ground Clearance 1' .8 " (325 mm)
  • Ground Pressure Average 4.1 psi (0.28 kg/cm )
  • Traction Pump/Traction Drive Piston/Planetary
  • Traction Braking Hydraulic
  • Drawbar Pull 11244 lbs. (50 kN)
  • Dimensions / Weight Specs
  • Height 7' 5.1 " (2263 mm) (J)
  • Clearance Circle Front (w/Bucket) 7' 6.3 " (2294 mm) (N)
  • Clearance Circle Rear 5' 5.6 " (1666 mm) (M)
  • Departure Angle 29.2
  • Width Without Bucket 5' 9.7 " (1770 mm) (K)
  • Length Without Bucket 9' 8.1 " (2949 mm) (F)
  • Operating Weight 9590 lbs. (4350 kg)
  • Length With Bucket 12' 2 " (3708 mm) (G)
  • Lift Capacity Specs
  • Max. Lift Height to Bucket Pin 10' 3 " (3124 mm) (A)
  • Reach at Max. Lift 2' 10.4 " (874 mm) (C)
  • Dumping Capacity Specs
  • Dump Height 7' 10.8 " (2408 mm) (B)
  • Dump Angle 38.5
  • Bucket Specs
  • Bucket Rollback @ Ground Level 31 (E)
  • Mounting Attachment System Multi Tach
  • Width 6' 2 " (1880 mm) (L)
  • Capacity 20.4 cu ft (0.58 m3)
Add of the above items to my quote request
for a period of   day(s)   week(s)   month(s)  




* Prices are subject to change.
* Please call us for any questions on our svl 75 rubber track loader rentals in Brunswick & Avon, serving Northeastern Ohio, including Cleveland OH, Medina OH, Lorain OH, and suburbs.